How much do you know about the details of gabion network installation

Open the folded gabion on the flat ground and flatten the excess creases. Fix the front back plate, back plate and clapboard at a certain position. It is in the shape of a box. The upper and lower corners of adjacent cage groups are composed of double stranded composite lines, upper and lower stringing or broken lines, which are tightened, fastened and combined with spiral solid lines.

Three. How many units is this cage divided by this partition? In order to improve the strength of the bedding, all edges of the board are covered with wire with larger diameter. Put several blank objects on the flat ground, and then combine them.

For the lower cage group, when binding the underframe at the adjacent edge between the upper cage groups. Bind the surface frame or mesh of the lower cage group together, and screw the fixed steel wire to form a whole. Fold the net cover, pull it into place and hang it with the front panel, side panel and partition.

Construction method and steps of gabion net

Preparation before construction, including customized gabion cage net, net mat and corresponding materials, and inspection; Excavation of retaining wall foundation pit; After passing the inspection, the control supply shall be set every 10 meters to control the axis, bidder and width. Laying foundation pit; In case of concrete foundation, concrete shall be mixed in the concrete mixing plant according to the approved construction mix ratio and transported to the construction site by concrete truck.

After the concrete foundation is grouted, manually pull the surface layer and sprinkle water. Assembly of protection cage unit; The binding requirements are: the isolation net and the four corners of the net body are bound together. Fasten the connection between the end net frame line and the net body with a spiral combination line to fasten the connection. At the junction of the reticular body, the spiral combination wire is twisted to tighten and fix.

Connect each rack unit; Binding requirements: binding combination shall be provided at the upper and lower corners of adjacent cages; In the space of adjacent cages, binding lines are combined at the top and bottom. Each square meter of the mesh bonding surface is provided with two combination lines. Adjacent frame lines and folding lines, and the folding lines are bound with double strands every 20cm.

Fill the cage with stones; With manual or mechanical filling, the grid can be filled immediately, tamped with wood or iron rod, and then filled with small crushed stones. Fill material on exposed surfaces shall be placed by hand. Flat and beautiful cover the cage; When the stone filling height in the cage meets the design requirements and the technical specifications of the stone filler also meet the design requirements, cover the gabion net; The binding requirements are the same as the steps.